uMP
Product Description
The μMP series GEN II power supply is a digitally configurable power supply with market-leading density and efficiency. It features a very wide 85 to 264 VAC input voltage range and active AC inrush control to automatically limit inrush current at turn-on to 40 A maximum. The unit is housed in a 1U case with 4 or 6 slot card options and power ratings from 400 W to 1600 W (input line and output voltage module dependent). All models have full EN60950 ITE and EN60601 medical safety approvals.
The μMP series GEN II offers 5 narrow range adjustable output modules which cover the range from 0.9 V up to 60 V, along with one wide range module which can be set from 3.3 V to 30 V. It employs active power factor correction to minimize input harmonic current distortion and to ensure compliance with the international EN61000-3-2 standard – they have a power factor of 0.99 typical.
The power supplies meet Military STD shock and vibration and offer optional conformal coating. Compared to GEN 1, the GEN II has superior aesthetics and 36% reduction in noise due to an intelligent fan with speed control and fault status.
HIghlights
- Input Range 85-264 VAC 120-374 VDC
- Frequency Range 47 – 440 Hz
- Inrush Current 40A Peak max. (soft start)
- Efficiency Up to 91.5%
- Power Factor .99 typ, (n/a for 440Hz)
- Standby Power uMP10/16 <13W; uMP04 <6W
- Leakage Current <400uA @ 264 VAC Input
- Holdover Storage 16.7mS minimum @ 1200W
- Isolation Meets EN60950; EN60601
- Factory Set Point Accuracy +/- 1%
- V-Program 0-5V input = 0-100% output
- Overall Regulation 0.4% or 30mV, which ever is greater
- RMS Ripple 0.1% or 10mV, which ever is greater
- P-P Ripple 1.0% or 50mV, which ever is greater