Executive Summary A procurement and engineering reference for high-reliability industries The power supply is rarely the headline component in a…
Read more 
Measurement & Instrumentation Labs Power Supplies
Ultra-Stable Power for Oscilloscopes, Analyzers, and Analytical Instruments
Horizon PSS supplies and specifies ultra-stable bench and modular DC power for oscilloscopes, spectrum analyzers, and high-precision analytical instruments, from routine R&D and QA benches to multi-instrument measurement racks. Power solutions integrate low-noise regulated output, fast transient response, and shielded architectures, with semi-custom and custom configurations available where an instrumentation platform outgrows catalog selection.
Find Your Product
Product
Type
Power
Input Voltage
Output Voltage
Action
Product:
RxxPxx/R Series
Type:
DC-DC
Power:
1W
Input Voltage:
5-24VDC
Output Voltage:
3.3-15VDC
View
Product:
MFC15 SERIES
Type:
AC-DC
Power:
15 W
Input Voltage:
90-264VAC
Output Voltage:
5-24 VDC
View
Product:
TPS 3650
Type:
AC-DC
Power:
1800W
Input Voltage:
115 / 230 VAC
Output Voltage:
0 - 36V
View
Product:
CSU1800AP-3-100
Type:
AC-DC
Power:
1800W
Input Voltage:
180-264VAC
Output Voltage:
12V
View
No results
Meeting Engineering, Procurement and Compliance Needs
Precision Power for Signal and Analytical Measurement
Delivering ultra-stable, low-noise output that keeps supply noise below the instrument's measurement floor, protecting signal integrity on oscilloscope and analyzer inputs.
Providing fast transient response and tight load regulation, holding output steady as circuits switch between acquisition and standby.
Supplying low-noise, filtered rails for high-precision analytical instruments, where power-line artifacts appear as measurement error.
Engineering shielded, grounded configurations that keep switching noise from coupling into RF and analog paths.
Providing fast transient response and tight load regulation, holding output steady as circuits switch between acquisition and standby.
Supplying low-noise, filtered rails for high-precision analytical instruments, where power-line artifacts appear as measurement error.
Engineering shielded, grounded configurations that keep switching noise from coupling into RF and analog paths.
Matching Power to the Instrument
Oscilloscopes and spectrum analyzers depend on ultra-stable reference and bias rails, where microvolt-level ripple appears as noise-floor degradation or spurious signals.
High-precision analytical instruments, including mass spectrometry and chromatography detectors, need long-term stability and low drift, since small supply shifts appear directly in results.
For basic R&D or QA benches, the BK Precision 1900B Series offers a cost-effective switching supply with fast transient response and built-in protections for routine testing.
Multi-instrument racks and automated test cells need several isolated outputs so each instrument's power stays independent of load changes elsewhere.
High-precision analytical instruments, including mass spectrometry and chromatography detectors, need long-term stability and low drift, since small supply shifts appear directly in results.
For basic R&D or QA benches, the BK Precision 1900B Series offers a cost-effective switching supply with fast transient response and built-in protections for routine testing.
Multi-instrument racks and automated test cells need several isolated outputs so each instrument's power stays independent of load changes elsewhere.
Standards and Compliance
Meeting IEC safety and EMI/EMC requirements for laboratory and test instrumentation, supporting compliant operation in regulated measurement environments.
Providing documented noise, ripple, and stability specifications so engineering and QA teams reference verified numbers when budgeting measurement uncertainty.
Providing documented noise, ripple, and stability specifications so engineering and QA teams reference verified numbers when budgeting measurement uncertainty.
Semi-Custom and Custom Configurations for Instrumentation OEMs
Adapting catalog platforms for oscilloscope, analyzer, and analytical instrument OEMs, including modified rail counts, shielding and filtering, panel or embedded packaging, and extended qualification for the host instrument.
Engineering custom power architectures where noise floor, rail count, or embedded footprint exceeds catalog limits, delivered under a defined NRE with documented specifications and configuration control.
Supporting production continuity for instrument OEMs shipping at volume, including PCN discipline and obsolescence management so qualified instrument's power source does not change without notice.
Engineering custom power architectures where noise floor, rail count, or embedded footprint exceeds catalog limits, delivered under a defined NRE with documented specifications and configuration control.
Supporting production continuity for instrument OEMs shipping at volume, including PCN discipline and obsolescence management so qualified instrument's power source does not change without notice.
Specifying a Power Supply for Measurement Instrumentation: What to Define
What gets an engineer to the right supply quickly: voltage and current range for the instrument's rails; noise and ripple limits referenced to the instrument's noise floor; long-term stability and drift over temperature and time; number of isolated outputs; remote interface (USB, RS-232, LAN, or GPIB) for automation; and, for embedded or OEM applications, the host's power budget, form factor, and volume.
This is enough for catalog and semi-custom selection. Full custom starts from the same list, feeding an NRE proposal.
This is enough for catalog and semi-custom selection. Full custom starts from the same list, feeding an NRE proposal.
Why Engineers and Procurement Teams Choose Horizon PSS
Documented noise, ripple, and stability data replaces datasheet guesswork when budgeting measurement uncertainty or qualifying incoming instruments.
Catalog, semi-custom, and custom capability sit with one supplier, so outgrowing a bench supply needs no new vendor.
Multi-interface, automation-ready control supports both manual bench work and fully automated calibration or test lines.
Production capability and configuration control extend to instrument OEMs shipping at volume, not only one-off lab purchases.
Catalog, semi-custom, and custom capability sit with one supplier, so outgrowing a bench supply needs no new vendor.
Multi-interface, automation-ready control supports both manual bench work and fully automated calibration or test lines.
Production capability and configuration control extend to instrument OEMs shipping at volume, not only one-off lab purchases.
Contact our experts to learn more
Ready to specify power for your measurement or instrumentation lab? Talk to our team about your noise and stability requirements, output count, and interface needs, or submit an RFI if your instrumentation platform's power needs have outgrown catalog selection.
By submitting this form, you consent to Horizon storing and processing the personal information provided in accordance with our Privacy Policy
Resources
Explore in-depth resources, including case studies, white papers, and blog posts on Horizon’s Medical power supply solutions.
