Data Center Power Supplies  

Data Center Power Solutions for AI, GPU, and High-Density Server Infrastructure

Horizon PSS designs custom and semi-custom power supplies for data centers, serving server, AI accelerator, storage, and networking OEMs and rack-level power shelf builders, where density, efficiency, and uptime decide the platform. Data center power solutions integrate redundant hot-swap architectures, 48 VDC distribution, and intermediate bus converters, with GPU power supplies engineered for fast load transients.

Find Your Product

Product
Type
Power
Input Voltage
Output Voltage
Action
No results

Meeting Engineering, Procurement and Compliance Needs

Custom Power Architectures for AI and Server Platforms
Delivering high-density data center power supplies with Titanium-class efficiency, cutting conversion losses and cooling load across racks at sustained high utilization.

Engineering redundant server power supplies with N+1 or 2N hot-swap architecture, active load sharing, and fault decoupling, so a single supply failure is a maintenance event, not an outage.

Providing GPU power supplies that hold regulation through the rapid load steps of AI training and inference workloads, with hold-up and bulk capacitance sized to the load profile.

Implementing intermediate bus converters that step 48 VDC rack distribution down to board-level rails efficiently in a compact footprint.
Standards Compliance Built Into the Design
Horizon PSS takes ownership of compliance documentation and qualification testing:

Meeting IEC/UL 62368-1 safety requirements for ICT equipment, including fault behavior in redundant and hot-swap configurations.

Passing conducted and radiated emissions and immunity testing through architecture-level filtering and grounding, addressing FCC Part 15 Class A, CISPR 32, and the IEC 61000 series.

Verifying harmonic performance with active PFC against IEC 61000-3-2, with ride-through behavior documented against the ITIC curve.

Supporting 80 PLUS Titanium targets with load-point efficiency data, and aligning with OCP Open Rack, CRPS, and PMBus conventions where the platform specifies them.
Application-Specific Engineering
Providing GPU power supplies for multi-kilowatt AI training and inference trays, where high-current, low-voltage density and thermal headroom limit the design.

Delivering redundant server power supplies, rack-level power shelves, and 48 VDC distribution for data centers and server farms, with N+1 shelf redundancy and hot-swap serviceability.

Delivering intermediate bus converters and point-of-load stages for accelerator, CPU, and memory rails with tight transient response.

Engineering conduction- and liquid-cooled configurations with fluid-compatible materials where air cooling reaches its limit.

Providing power supplies for servers, storage, and networking at the edge, in wide-temperature, space-constrained micro data center enclosures.
Custom Development Process for OEM Programs
Defining specifications, compliance pathways, and schedules for data center power solutions before commitment, through transparent NRE structures covering load-step characterization for GPU power supplies, efficiency at your load points, and chassis thermal validation.

Ensuring the data center power supply qualified during platform bring-up matches production units identically through configuration control and PCN discipline.

Providing advance notification of changes affecting form, fit, function, or compliance across multi-generation lifecycles, with obsolescence management and qualified second sources.
RFI/RFQ Support for Procurement Teams
Supporting procurement evaluation of data center power supplies with efficiency curves for each bus converter stage, load-step and hold-up test data for GPU server power supplies, redundancy and hot-swap verification for redundant server power supplies, EMC and safety reports, thermal derating, PMBus documentation, MTBF calculations, and volume-ramp capacity commitments.
Why Data Center Equipment OEMs Choose Horizon PSS
Efficiency, safety, and EMC compliance are owned at architecture level, not handed to you as a qualification burden.

Engineering depth covers GPU power supply load transients, 48 VDC distribution with intermediate bus converter stages, and redundant server power supply design.

Production capability and design documentation are maintained across multi-generation platform lifecycles.

Custom data center power supplies cut conversion losses, cooling overhead, and redesign cycles as rack power climbs.

Contact our experts for Data Center power solutions

Ready to discuss power solutions for data centers on your platform? Request an engineering consultation or submit an RFI with your rack architecture, power density targets, redundancy scheme, efficiency class, and qualification requirements.

This field is for validation purposes and should be left unchanged.

By submitting this form, you consent to Horizon storing and processing the personal information provided in accordance with our Privacy Policy

Accessibility
Reset
Big Cursor (Black)
Big Cursor (White)
Enlarge Window
Larger Font
Smaller Font
Readable Font
Monochrome
Dark Contrast
Light Contrast
Highlight Links
Highlight Headers
Images Description
Keyboard Navigation
Disable Flicker
Powered by Emilia Digital